Components / Connectors / Power Entry Modules without Filter

Power Entry Modules without Filter

SCHURTER's devices are based on IEC connectors with additional functions. They are available for screw-in, snap-in, PCB or sandwich mounting.

Indicated types: 1 - 20 of 46

  • T/S:

Picture(s)Approvals [?]
Term: Approvals
Explanation:Approvals indicate the conformity of the products with the national testing institution requirements by listing of the relevant approval logos.



appr = Approvals

The link leads you to the search mask where you can query for certificates of the selected products.

Approvals

Detailed information about Approvals will be documented in the general product informations.Details about Approvals

For further assistance: contact@schurter.ch
Type [?]
Term: Type
Explanation:The Type describes the product line or the so-called series. It includes the different product variants, which are provided with a unique article respectively order number.



html = Data Sheet in HTML format



pdf = Data Sheet in PDF format



CAD = 3D CAD-Drawings



appr = Approvals



PCS = Product Content Sheet (PCS)



PCN =

Product Change Notification (PCN)





RoHS



China RoHS

For further assistance: contact@schurter.ch
Mating ComponentsRated current [?]
Term: Rated current
Explanation:Normally, the maximum rated current is given in accordance with the admission test of the respective inspection. Accordingly, the international test requirements apply primarily according to the IEC standard. Alternatively, the rated current details are briefly UL also specified by the test requirements of the American testing by Underwriters Laboratories.



  In the meantime it has been shown that the nominal current range of a product is of interest, so we will show newly the minimum value. This corresponds, if present, the smallest approved rating of the product. Otherwise, a blank value or also the value 0 is used.



It was also necessary to distinguish between the rated currents for alternating current (AC) and direct current (DC), since different products may be used in both applications.

For further assistance: contact@schurter.ch
Mounting Versions [?]
Term: Mounting Versions
Explanation:The products can be installed differently. Therefore the attachment method is primarily of interest. Next it must be clarified whether the component will need to be mounted from the front or the back or if it can be mounted on a circuit board.



Further criteria as snap method or snap-position are explained in order to distinguish the different offers also .



Full details for installation are explained in detail in the general product information.

Mounting

For further assistance: contact@schurter.ch
TerminalsLine Switch [?]
Term: Line Switch
Explanation:Also includes circuit breaker switch and switch for Bowden cables.



Details about the switches can also be found in the general product information.

Line Switch

For further assistance: contact@schurter.ch
Circuit Breaker [?]
Term: Circuit Breaker
Explanation:Circuit Breakers type and amount of switched poles



Details of Circuit Breakers can be found in the catalog or in the general product information

General Product Information

For further assistance: contact@schurter.ch
Fuseholders [?]
Term: Fuseholders
Explanation:1.) fuse holder does not include circuit breakers



2.) Details about fuse-links can be found in the catalog under Non-Resettable Fuses

Detailed information on the fuse holder and fuse drawers can be found in the general product information.

Fuse drawer

For further assistance: contact@schurter.ch
Voltage Selector [?]
Term: Voltage Selector
Explanation:You can refer to different input voltages



Details about the voltage selector can also be found in the general product information

Voltage Selector

For further assistance: contact@schurter.ch
IEC Type [?]
Term: IEC Type
Explanation:Connector type according to IEC 60320-1 resp. IEC 60320-2-2, UL498, CSA C22.2 no.42



Details on connectors and their names can be found in the general product information

Mating Connectors

For further assistance: contact@schurter.ch
Protection Class [?]
Term: Protection Class
Explanation:Class I: with ground; Class II: without ground



Detailed information relating to protection class can also be found in the general product information

Protection Class

For further assistance: contact@schurter.ch
Version with Line Filter [?]
Term: Version with Line Filter
Explanation:Same functional version additional with line filter

For further assistance: contact@schurter.ch
ApplicationChange Fuseholderstandard [?]
Term: Change Fuseholderstandard
Explanation:The fuseholder standard 60127-6 Edition 2.0 has increased requirements according glow wire test and according the mounting directions that are difficult to overcome. This requires a verificartion and propbably an adaptation of the respective family. The approvals will be renewed according to this effort. The mentioned group contains the several families implemented at the same time.The status informs about the implemation progress for the respective family.- open: The conversion work is in preparation- wip: The examinations are carried out and the individual product variants are in conversion- ready: The conversion of a product type has successfully been concluded- n.a.: There will be no changeDetails about the change can be watched on a separate Microsite:Microsite Fuseholder

For further assistance: contact@schurter.ch
Comment
IEC UL
MethodSnapper [?]
Term: Snapper
Explanation:Snap mounting might be separated in more detailes as follows:



One Step: Indicates types for sandwich mounting for one fixed panel thickness



Individual step: Indicates snappers for different panel thickness dimensions. e.g. 1.0mm, 1.5mm



Universal: Indicates serrated snappers fitting a range of panel thickness dimensions, e.g. 0.8mm - 1.2mm



Details see general product informations:

Mounting

For further assistance: contact@schurter.ch
Position [?]
Term: Position
Explanation:Mounting position: Indicates orientation of screw holes of snappers in relation to the connector position



Mounting position 1





Mounting position 2



Deatils baout the subject can be looked up in the general product informationMounting

For further assistance: contact@schurter.ch
SideTypeNumber of PolesGroupStatus
  • NEW
  • Phase Out [?]
    Term: Phase Out
    Explanation:These products are at the end of their lifecycle. We recommend you not to use them for new applications.



    If products are not available for sales any more, the product information will still remain on the SCHURTER website.



    Discontinued Products

    For further assistance: contact@schurter.ch
  • 1) RoHS [?]
    Term: 1) RoHS
    Explanation:Compliant with the Restriction of Hazardous Substances (RoHS) directive. See further details. RoHS

    For further assistance: contact@schurter.ch
  • 2) CHINA-RoHS conform [?]
    Term: 2) CHINA-RoHS conform
    Explanation:Compliant with the Restriction of Hazardous Substances (CHINA-RoHS) directive. See further details. China RoHS

    For further assistance: contact@schurter.ch
  • 3) 3) non CHINA-RoHS conform [?]
    Term: 3) 3) non CHINA-RoHS conform
    Explanation:Compliant with the Restriction of Hazardous Substances (CHINA-RoHS) directive. See further details: China RoHS

    For further assistance: contact@schurter.ch
  • V-Lock [?]
    Term: V-Lock
    Explanation:V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.

    Details of the V-Lock system can be found in the general product information.

    V-Lock

    For further assistance: contact@schurter.ch
  • Medical [?]
    Term: Medical
    Explanation:Indicated products meet the requirements for use in medical devices according to the standard 60601-1. More details are listed in product data sheet.

    For further assistance: contact@schurter.ch
  • 2.5 A
  • 6 A
  • 10 A
  • 16 A
  • Sandwich
  • Screw
  • Screw-on mounting on PCB
  • Snap-in
  • Snap-in or screw-on
  • One step
  • Universal
  • individual step
  • Mounting Position 1
  • Mounting Position 1& 2
  • Mounting Position 2
  • Front Side
  • Front-/Rear-Side
  • Rear Side
  • 1-pole
  • 2-pole
  • 1 or 2 pole
  • TA35 1-pole
  • TA35 2-pole
  • TA45 2-pole
  • 5 x 20
  • 5 x 20 or 6.3 x 32
  • 1-pole
  • 2-pole
  • 1 or 2 pole
  • optional, 1 or 2 pole
  • Step switch
  • series-parallel
  • step
  • Suitable for appliances with protection class I
  • Suitable for appliances with protection class I or II
  • Suitable for appliances with protection class II
CMF1, SGE GST, PG05, Kombielement Leiterplatte 2,5A ohne Filter s/w  VDE cURusChinaCMF1, CMF4
htm Datasheet CMF1, CMF4
pdf Datasheet CMF1, CMF4
cad
pcs pcn e-Shop
1), 2)
mating connection
outlets
2.5 A Screw-on mounting on PCB Rear Side PCB 1-pole C8
C8_70C_2pol
Suitable for appliances with protection class II unwired
CMF2, SGE GST, PG05, Kombielement Leiterplatte 2,5A ohne Filter s/w  VDE cURusChinaCMF2, CMF5
htm Datasheet CMF2, CMF5
pdf Datasheet CMF2, CMF5
cad
pcn e-Shop
1), 2)
mating connection
outlets
2.5 A Snap-in or screw-on Rear Side PCB 1-pole C8p
C8_70C_polarisiert_3pol
Suitable for appliances with protection class II unwired
CMF3, SGE GST, PG05, Kombielement Leiterplatte 2,5A ohne Filter s/w  VDE cURusChinaCMF3, CMF6
htm Datasheet CMF3, CMF6
pdf Datasheet CMF3, CMF6
cad
pcs pcn e-Shop
1), 2)
mating connection
outlets
2.5 A Snap-in or screw-on Rear Side PCB 1-pole C6
C6_70C_3pol
Suitable for appliances with protection class I unwired
Phase Out [?]
Term: Phase Out
Explanation:These products are at the end of their lifecycle. We recommend you not to use them for new applications.

If products are not available for sales any more, the product information will still remain on the SCHURTER website.

Discontinued Products
For further assistance: contact@schurter.ch

2565-K, SGE GST, PG05, KE/Frontplatte/2.5A/ohne Filter
VDE CCSAUL2565-K
htm Datasheet 2565-K
pdf Datasheet 2565-K
cad
e-Shop
1)
mating connection
outlets
2.5 A Snap-in One step Front Side Solder terminals or quick connect terminals 1 or 2 pole C6
C6_70C_3pol
Suitable for appliances with protection class I
DC11, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w  DC11, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w  ENEC 10cURusChinaDC11
htm Datasheet DC11
pdf Datasheet DC11
cad
pcs pcn e-Shop
1), 2) V_Lock_Logo
mating connection
outlets
optional
Assorted Covers, Wire Harness, Cord retaining kits
10 A Snap-in or screw-on One step Mounting Position 2 Front-/Rear-Side Quick connect terminals 4.8 x 0.8 mm 1 or 2 pole C14
C14_Stecker_3_polig
Suitable for appliances with protection class I or II Version with line filter
DC12
prewired
KEB1, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter  KEB1, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter  ENEC 10URChinaCSAKEB1
htm Datasheet KEB1
pdf Datasheet KEB1
cad
pcs pcn e-Shop
1), 2)
mating connection
outlets
optional
Assorted Covers, Cord retaining kits
10 A Snap-in or screw-on One step Mounting Position 2 Front-/Rear-Side Quick connect terminals 4.8 x 0.8 mm 1-pole C14
C14_Stecker_3_polig
Suitable for appliances with protection class I Version with line filter
KFB1
prewired
KEB2, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter  KEB2, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter  VDE URChinaCSAKEB2
htm Datasheet KEB2
pdf Datasheet KEB2
cad
pcs pcn e-Shop
1), 2)
mating connection
outlets
optional
Assorted Covers, Cord retaining kits
10 A Snap-in or screw-on One step Mounting Position 2 Front-/Rear-Side Quick connect terminals 4.8 x 0.8 mm 2-pole C14
C14_Stecker_3_polig
Suitable for appliances with protection class I Version with line filter
KFB2
prewired
1074, SGE GST, PG05, KE/Frontplatte/10A/ohne Filter  VDE URCCSAUL1074
htm Datasheet 1074
pdf Datasheet 1074
cad
pcs e-Shop
1)
mating connection
outlets
optional
Assorted Covers
10 A Snap-in Universal Mounting Position 2 Front Side Solder terminals or quick connect terminals 1-pole C14
C14_Stecker_3_polig
Suitable for appliances with protection class I
DC21, SGE GST, PG05, Kombielement Leiterplatte 10A ohne Filter  DC21, SGE GST, PG05, Kombielement Leiterplatte 10A ohne Filter  ENEC 10cURusDC21
htm Datasheet DC21
pdf Datasheet DC21
cad
pcs e-Shop
1), 2) V_Lock_Logo
mating connection
outlets
optional
Cord retaining kits
10 A Screw Rear Side For PCB mounting 2-pole C14
C14_Stecker_3_polig
Suitable for appliances with protection class I Version with line filter
DC22
prewired
NEW
DD11, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter
ENEC 10cURusDD11
htm Datasheet DD11
pdf Datasheet DD11
cad
pcs pcn e-Shop
1), 2) V_Lock_Logo Medical.jpg
mating connection
outlets
optional
Wire Harness, Cord retaining kits
required
Fusedrawer 2
10 A Screw Front-/Rear-Side Quick connect terminals 4.8 x 0.8 mm 2-pole 5 x 20 1 or 2 pole C14
C14_Stecker_3_polig
Suitable for appliances with protection class I Version with line filter
DD12
A open prewired
NEW
DD21
ENEC 10cURusDD21
htm Datasheet DD21
pdf Datasheet DD21
cad
pcs pcn e-Shop
1), 2) V_Lock_Logo Medical.jpg
mating connection
outlets
required
Fusedrawer 2
10 A Screw Rear Side For PCB mounting 2-pole 5 x 20 1 or 2 pole C14
C14_Stecker_3_polig
Suitable for appliances with protection class I or II Version with line filter
DD22
A open prewired
KM, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w  KM, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w  ENEC 10cURusChinaKM
htm Datasheet KM
pdf Datasheet KM
cad
pcs e-Shop
1), 2) Medical.jpg
mating connection
outlets
optional
Wire Harness, Cord retaining kits
required
Fusedrawer 2
10 A Snap-in individual step Mounting Position 2 Front Side Quick connect terminals 4.8 x 0.8 mm 2-pole 5 x 20 1 or 2 pole C14
C14_Stecker_3_polig
Suitable for appliances with protection class I or II Version with line filter
KMF
A open with or without shield prewired
KD, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w  KD, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w  ENEC 10URChinaCSAKD
htm Datasheet KD
pdf Datasheet KD
cad
pcs pcn e-Shop
1), 2) V_Lock_Logo Medical.jpg
mating connection
outlets
optional
Assorted Covers, Wire Harness, Cord retaining kits
required
Fusedrawer 3
10 A Snap-in or screw-on One step Mounting Position 1 Front-/Rear-Side Quick connect terminals 4.8 x 0.8 mm 2-pole 5 x 20 or 6.3 x 32 1 or 2 pole step C14
C14_Stecker_3_polig
Suitable for appliances with protection class I Version with line filter
CD
Audio Products
B open prewired
KD, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter s/w  ENEC 10URChinaCSAKD-Bowdencable
htm Datasheet KD-Bowdencable
pdf Datasheet KD-Bowdencable

pcn e-Shop
V_Lock_Logo Medical.jpg
mating connection
outlets
optional
Cord retaining kits
required
Bowdencables incl. accessory, Fusedrawer 3
6 A Snap-in or screw-on One step Mounting Position 1 Front-/Rear-Side Quick connect terminals 4.8 x 0.8 mm 2-pole 5 x 20 or 6.3 x 32 1 or 2 pole step C14
C14_Stecker_3_polig
Suitable for appliances with protection class I Version with line filter
CD-Bowdencable
with line switch for Bowdencable prewired
KG, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter  KG_snap  ENEC 10URCSAKG
htm Datasheet KG
pdf Datasheet KG
cad
pcs pcn e-Shop
1), 2) V_Lock_Logo Medical.jpg
mating connection
outlets
optional
Assorted Covers, Cord retaining kits
required
Jumper Wire 1, Fusedrawer 1, Voltage Selectors Insert 1
10 A Snap-in or screw-on One step Mounting Position 1 Front-/Rear-Side Quick connect terminals 4.8 x 0.8 mm 2-pole 5 x 20 or 6.3 x 32 1 or 2 pole series-parallel C14
C14_Stecker_3_polig
Suitable for appliances with protection class I Version with line filter
CG
B open partially wired
KG, SGE GST, PG05, Kombielement Frontplatte 10A ohne Filter  ENEC 10URCSAKG-Bowdencable
htm Datasheet KG-Bowdencable
pdf Datasheet KG-Bowdencable
cad
e-Shop
Medical.jpg
mating connection
outlets
optional
Cord retaining kits
required
Bowdencables incl. accessory, Jumper Wire 1, Fusedrawer 1, Voltage Selectors Insert 1
6 A Snap-in or screw-on One step Mounting Position 1 Front-/Rear-Side Quick connect terminals 4.8 x 0.8 mm 2-pole 5 x 20 or 6.3 x 32 1 or 2 pole series-parallel C14
C14_Stecker_3_polig
Suitable for appliances with protection class I Version with line filter
CG-Bowdencable
with line switch for Bowdencable partially wired
6765_6621a10048_GST_PG07_Gerätest_Vorrichtungen   URCCSAULENEC 146765
htm Datasheet 6765
pdf Datasheet 6765
cad
pcs pcn e-Shop
1)
mating connection
outlets
optional
Assorted Covers, Wire Harness
10 A Screw Front-/Rear-Side Solder terminals or quick connect terminals 2-pole 5 x 20 1 or 2 pole C14C18
C14_Stecker_3_polig  2_polig
Suitable for appliances with protection class I or II G open
6762_9998a300024_GST_PG05   6762_SGE_GST_PG05_KE_Kombielement_Frontplatte_10A_ohne Filter  URCCSAULENEC 146762
htm Datasheet 6762
pdf Datasheet 6762
cad
pcs e-Shop
1)
mating connection
outlets
optional
Assorted Covers, Wire Harness
10 A Snap-in or screw-on Universal Mounting Position 2 Front Side Solder terminals or quick connect terminals 1 or 2 pole 5 x 20 1-pole C14C18
C14_Stecker_3_polig  2_polig
Suitable for appliances with protection class I or II G open
6766_SGE_GST_PG05_KE_Frontplatte_10A_ohne Filter  URCCSAUL6766
htm Datasheet 6766
pdf Datasheet 6766
cad
e-Shop
1) V_Lock_Logo
mating connection
outlets
10 A Screw Front-/Rear-Side Solder terminals or quick connect terminals 2-pole 5 x 20 1 or 2 pole Step switch C14
C14_Stecker_3_polig
Suitable for appliances with protection class I G open
NEW
6135_Wippe_weiss  6135_Wippe_grün
ENEC 10cURusChina6135
htm Datasheet 6135
pdf Datasheet 6135
cad
pcs e-Shop
1) V_Lock_Logo
mating connection
outlets
optional
Assorted Covers, Cord retaining kits
10 A Snap-in individual step Mounting Position 2 Front Side Quick connect terminals 6.3 x 0.8 mm 2-pole TA35 2-pole C14
C14_Stecker_3_polig
Suitable for appliances with protection class I with circuit breaker TA35 unwired

Indicated types: 1 - 20 of 46