Our new Inlet/ Outlet module type 4730 is a 'gender changer' connection solution, which is a through- bulkhead screw mounted. This allows a mains supply to be connected to the IEC C20 inlet on one side of an enclosure using cord sets, and a supply to be taken from the IEC J outlet on the other side or vice- versa.This innovative addition to our comprehensive IEC range is an ideal power interconnection solution for equipment in enclosures. It has many possible applications such as test and measurement devices in climatic test chambers, or for systems such as power supply racks.The body of the module is composed of UL94-V0 and the contacts are nickel- plated brass of one single piece (no soldering or riveting).The outlet complies to EN 60320-1/C20, and the inlet to EN 60320-2-2/J and is available in class I cold condition versions.The module is approved to TUV 16A/250V and cURus 20A/250V.

http://www.schurter.ch/pdf/e_d/c_0723_4730.pdf

SCHURTER's new power cord connectors are rated for use with cordage up to 16/21 A. Two types, 4789 and 4790 (plug or connector), are angled for closer placement of the equipment to the wall, consuming less space and minimizing the potential for tangling or tripping.

The rewireable cord connectors have pillar terminals for ease of safe and reliable wire connections. Unlike straight plugs, an angled plug is less apt to disconnect from the inlet when someone trips over the cord. The stronger connection assures a safer and more reliable supply of power to the equipment. The size of the strain relief can be specified for a 8.7 mm or 10mm (16/14AWG) cable.

Approved according to ENEC 16 A / 250 V and 21 A / 125, 250 V UL, CSA, the cord connectors are ideal for higher power consuming equipment found in IT environments, high-end household appliances, power electronics (i.e. power supplies, voltage stabilizers) as well as industrial environments.

Datasheet

SCHURTER's new series 4797 appliance outlets are rated up to 20 A at 250 VAC. The high current outlets consist of two versions for screw or snap-in mounting. The snap-in version was developed in response to customer demand for easier mounting and smaller fit over screw mount types, which is especially important for gang mounting. It is available in seven variations to suit a variety of panel thicknesses ranging from 0.8 - 3 mm. Connections can be made with 6.3 x 0.8 mm quick-fit terminals or solder tabs. The body is made from flame resistant thermoplastic UL94 V-0 while the live parts are made of copper alloy to protect against corrosion and to provide excellent conductivity.

The standard outlet is offered for protection class I (L / N / PE). A class II (L / N) type for use in medical equipment is available on request. Built according to IEC 60320-2-2 type J and type L, they are rated for 16 A at 250 VAC, 50 Hz according to ENEC ( <img src="../../images/support/approvals/enec_vde.gif" width="30">) and for 20 A at 125/250 VAC, 60 Hz according to cURus (USA & Canada) ( <img src="../../images/support/approvals/curus.gif" width="40"> ).

The 4797 outlets are suitable for use in test and IT equipment according to IEC/EN 60950, providing a convenient solution for distributing power from racks to multiple pieces of equipment. They are also ideal for use in outlet strips used for power distribution in household, office and industrial environments.

Datasheet

Schurter's new power entry module, series EF11, combines an appliance inlet, according to IEC/EN 60320-1, and 2-pole circuit breaker for equipment. Unlike popular fused modules, the circuit breaker provides manual reset of the circuit, and higher current limiting characteristics. It also provides circuit status indication depending on the switch position (I/O).

Circuit breaker options include 1 or 2-pole thermal overload protection up to 16A (20A), or without bi-metal for 2-pole on/off switching only (max. 16A). An optional under-voltage release can detect power loss and protect against unwanted restart. A remote trip function is also available.

Power entry modules are designed to save panel space, cut parts count and streamline wiring. The EF11 is pending VDE approvals up to 16A at 250 Volts, and UL & CSA up to 20A at 125 and 250 Volts. Applications include higher power consuming equipment, like CAD systems, office automation equipment, industrial workstations, base stations, file servers, bar coding equipment and power supplies.

The EF11 will be available with a line-filter in early 2002, type EF12.

DD series is most compact power entry design for safe power input

Schurter announced today the new DD11 and DD12 power entry modules as an extension to their existing snap-in and pcb mount counterparts. The new addition with mounting flange is offered for applications requiring screw mounting to the panel.

The DD series provides up to four functions packed into a 49 x 30 mm space saving package. The additional mounting flange supports horizontal mounting, thereby optimizing space while providing maximum functionality. The inlet portion of the unit (according to IEC 60320-1, style C14 or C18), integrates a fuseholder, switch and optional standard or medical EMC filter.

The DD series is especially suited for medical applications, designed to comply with IEC 60601-2. The fusedrawers are offered as 1 or 2-pole and accept 5 x 20mm fuses. An extra-safe feature prevents users from removing the fusedrawer while the power cord is plugged into the equipment. The medical filter limits leakage current to 5 or 80 uA respectively. The M80 version provides increased attenuation of electro-magnetic interference, yet still meets the leakage requirements for non-patient contact devices. The 2-pole switch offers an inrush current peak of 100 A capacitive for 3 ms and is available in both illuminated and non-illuminated versions.

The series is rated for currents up to 8 A at 125 VAC 60 Hz by UL/CSA, and 10 A at 250 VAC 50 Hz by IEC/EN. It is also suited for use in applications as described in IEC 60950, such as measurement, office, security and data communications equipment. The compact design makes it ideally suited for use in low profile designs, especially 1RU enclosures for 19" racks, and IT and telecom infrastructures where equipment is continually downsized. Delivery is stock to 6 weeks.

http://www.schurter.ch/pdf/english/typ_DD11.pdf

Series 1601 is built according to IEC/EN 60320-1, C20

Schurter's comprehensive range of high current inlets and outlets are being used successfully worldwide and especially in North America. The latest addition to this broad range of products is series 1601, which is designed for PCB mounting.

PCB mounting eliminates costly wiring and provides a highly economic and efficient installation alternative. The 1601-X-4460-A-20 has 3 PCB terminals and an additional 6.3 mm quick-connect at the ground terminal. The version 1601-X-4460-A-29 also offers additional 6.3 mm quick-connects at L and N. The combination of pcb and fast-on terminals offers multiple connection possibilities.

The body of the 1601 is made from flame resistant thermoplastic PA6/UL94V-0. The live parts are made of copper alloy. The pins are nickel-plated and the terminals are tin-plated. The inlet is designed according to the standards IEC60320-1 / EN 60320-1 / VDE 0625-1 and is UL and CSA approved at 21 A/250 VAC and ENEC approved at 16 A/250 VAC. Applications include equipment with higher power requirements, such as household appliances, consumer goods, IT and telecommunication equipment, medical equipment, portable industrial appliances and machines. Lead-time is stock to six weeks.

Datasheet

The diversified appliance couplers from SCHURTER are successfully in use throughout the world. . This product portfolio has been widened through the series 5001 of panel mounting appliance outlet, specially developed for printed circuit board mounting. Mounting onto PCB’s provides the user with high cost effectiveness.

The series 5001 is available in protection classes I (3 pole) and II (2 pole). The earthing contact (arrangement in protection class I) is provided with an additional terminal for connecting the appliances chassis directly at the power input.

The 5001 housing is made from polyamide PA6 / UL 94V-0. Current carrying parts are made from a copper alloy. The pins are nickel plated and the connections tinned.

In the standard arrangement of the 5001, 4 fixing holes are available for mounting. Fixture onto a panel or PCB takes place with screws or rivets.

A special arrangement with snap rivets is also available for PCB mounting.

The 5001 appliance complies with standards IEC60320 / EN 60320 / VDE 0625.

Approvals:

- ENEC 05: 10 A / 250 VAC

- cCSAus: 15 A / 250 VAC

The 5001 appliance outlet is used for mains extensions and is to be found in applications such as power distributors, household devices, entertainment electronics, office communications, medical technology, industrial electronics and automation.

Datasheet

The SCHURTER 6610 is the first of its kind appliance outlet using IDC terminal technology. This novel product allows significant reduction of labour costs by supporting a more efficient assembly method. Multiple outlets can be banked and wire connections can be bussed, connecting the terminals all at once. The product is especially suited for power distribution units and appliances with multiple power outputs.

The IEC F appliance outlet is equipped with IDC terminals and available for two different wiring versions, “along�? and “across�? to the connector pin axis. The terminals accept insulated solid wires with cross section AWG12 / 2.5 mm² and AWG16 / 1.0 – 1.5 mm². The component is designed for snap-in mounting and comes with a protection cover. The cover aids in pressing the wires and, at the same time protects from electrical shock. Special versions with an individual quick connect or solder line terminal are available. The series has ENEC and cURus approvals and is suitable for applications in accordance with IEC/EN 60950.

Datasheet

The addition of the Quadbloc+2 type 4758 to our current Quadbloc range, adds even more applications than the Quadbloc type 4752 and Quadbloc+1 type 4754. It is a single module consisting of four ganged IEC "F" outlets, and a frame into which a Schurter single (Type 6200) or double fused (Type 6220) 2mm snap- in inlet can be inserted. This creates a compact, fully integrated module that allows for rapid fitting, which saves on assembly time.The busbar is formed of a single piece, so it is far more robust than the traditional soldered type, and is available with a choice of 6.3mm quick- connect tabs, solder tabs, or the combination of both. The rear is housed in a black plastic cover that protects from accidental contact.The 4758 is ideal for a vast range of applications such as computer systems, uninterruptible power supplies, industrial control systems and many more.The Quadbloc+2 offers a compact snap- in unit for various panel thicknesses from 1mm to 3mm. Type 4758 is class I protection and the module is approved to 10A/250V VDE and 15A/250V cURus.

The new EC11 is another new product recently added to Schurter's fast growing range of high current power entry modules. The IEC/EN 60320-1 appliance inlet accepts detachable power cords up to 16A (20A). The molded housing, with integrated switch, is available for screw or snap-in mounting to the chassis.The line-switch is slim, 2-pole and wired to the inlet. Wired power entry modules saves panel space and assembly time by consolidating the number of cutouts, and eliminating the manual wiring in between. The switch in-rush current is 100A for 3-4 ms.The EC11 is pending approvals VDE up to 16A at 250 Volts and UL & CSA up to 20A at 125 and 250 Volts. Applications include higher power consuming equipment, like CAD systems, office automation equipment, industrial workstations, base stations, bar coding equipment, and power supplies.The EC11 will be available with a line-filter in early 2002, type EC12.

Compact equipment designs with increasing electrical switching capacity demands for a new generation of appliance inlets with line switches. With the DC 11 SCHURTER offers an IEC/EN 60320-1 appliance inlet with a 1- resp. 2-pole line switch, approved according to ENEC 10A / 250V and 16A / 125, 125V UL, CSA. We try herewith to match the actual market demands with our DC11.The products are ideally suitable for the application in power supplies especially in computers, medical equipment and other industrial equipment.Mid of 2003 the assortment will be extended by a filtered version (DC12) and afterwards also by a PCB-version (DC21).

We are pleased to announce the addition of a new 16/20A snap-in inlet to our huge range of IEC solutions. This inlet was developed in response to high customer demand for a snap- in alternative to our popular 4798 series. It allows for easier fitting, and is more compact, requiring a smaller outline on a panel.The 4793 provides a highly efficient solution for higher-powered equipment such as heaters, catering equipment and lighting systems to name but a few. It is available in several different versions to suit a variety of panel thicknesses from 1 to 3mm, with 6.3mm quick- fit terminals or solder tabs.The body of the inlet is made from UL94-V0 thermoplastic, and the contact pins and terminals are bright electro- tin plated brass for low resistance.The inlet is designed to comply with EN 60320-1/C20 for Class I cold condition. Approvals VDE 250V/16A and cURus 250V/20A are expected by December 2001.

Schurter's new IEC outlet eliminates the need for a detachable line cord by providing easy power connection and disconnection of power supplies to a backplane. Designed for redundant power supply applications, the connector provides for swapping out supplies when power is on.The outlet is easily screwed in or snap-mounted. Snap-in mounting is standard for outlets fitting panels of 1.5mm thickness. Types with snap arms, set further back, are available to accommodate thicker panels. Terminals accept 4.8mm solder-/quick- connect or 6.3mm quick-connects. The connector is cUL approved, at 15A/250V and VDE approved at 10A/250V according to IEC/EN 60320-2-2/F Class I + II, with or without ground.